Additional Images

3084981 | CUMMINS N14 FLAT DECK CYLINDER HEAD, REMANUFACTURED

P131425R
Pricing: $713.33

Customize Your Item

Refundable Core Charge: $250.00
Qty:
Free Shipping!

Description

Is your Cylinder Head in it for the long haul?

We all know in order to get a million of miles out of your engine you need to keep your engine cool, well lubricated, and perform regular maintenance. Let one of these slip... and your rig is going to wind up in the shop with you stuck waiting for the repair.

It's no secret that diesel engine parts can cost an arm and a leg. That’s where HHP steps in; we offer premium aftermarket parts at up to 50% off OEM prices. While most believe aftermarket retailers sell cheap parts with zero warranty, packed in a beat-up box from who knows where, HHP is here to kick that stereotype to the curb. HHP provides Cylinder Heads with additional engine cooling properties and a 1-year warranty. How’s that for an aftermarket part?

Need a little extra proof? Let's talk Cylinder Heads.

  • Why buy new, when you can buy remanufactured and save? This cylinder head is magnafluxed to detect cracks, then furnace welded if needed. Under lower limit heads are thermal cast, 100% air decay and wet tested, and finished by chasing the threads and providing a machined finish.

  • Hand reassembled and thoroughly checked, this Cylinder Head includes everything you need to go another million miles.


Contents:

  • (1) Cylinder Head

Warranty:

  • 1 year warranty. First 6 months, parts and labor (maximum $45/hr no premium, overtime or holiday rates).
  • Second 6 months, parts itself.


Warranty acceptance/denial will be at the sole discreation of each respected manufacturer. Each of HHP's manufacturers utilizes their own warranty procedures which vary in claim review time (typically between 3-5 weeks). On items that carry a labor warranty, rates are paid on flat-rate book time. Rates vary by manufacturer.

OEM Applications:
  • 3078360
  • 3078380
  • 3084060
  • 3084981
  • 3406739
  • 3406742
  • 3411814
  • 3411817

Technical Data

Casting
New Thickness/MeasuredAt: 4.387"
Minimum Thickness: 4.3600"
Warp Spec: .003" Overall
Injector Tip Protrusion: .0580-.0720"
Comments:
* Check Valve Angles, Different Combinations Used For Select 1, 2 Or 3 - Intakes 20 & 30° And Exhausts Are 30 + 45°.

Valve
Intake:
Stem Diameter: .3775-.3793"
Angle: 19.5°
Margin: .114� Min
Recession: .000-.025� V/Rec

Exhaust:
Stem Diameter: .3775-.3793"
Angle: 29.5°
Margin : .114� Min
Recession: .000-.025� V/Rec

Valve Guide Information
Intake
Guide Height 1.2500-1.2900�
Guide Clearance: 0031�

Exhaust
Guide Height 1.2500-1.2900�
Guide Clearance: .0031"

Valve Seat Information
Intake:
Seat Width: .063-.125"
Seat Angle: 20°
Seat Inside Diameter: 1.9995-2.0005�
Seat Insert Bore Depth: .370-.375�

Exhaust:
Seat Width: .063-.125�
Seat Angle: 30°
Seat Inside Diameter: 1.9995-2.0005�
Seat Insert Bore Depth: .370-.375�

Valve Spring (Outer Or Single Spring)
Intake
Free Length: 3.460"
Installed Height: 2.810"
Open Test Press: 255# @ 2.240"
Close Test Press: 120# @ 2.810"
Exhaust
Free Length: 3.460�
Installed Height:2.810�
Open Test Press: 255# @ 2.240�
Close Test Press: 120# @ 2.810�

Rocker Shaft
Shaft Diameter: 1.3710-1.3725"
Bore Diameter: 1.3735-1.3765"

Installation
Intake Valve Lash: .014" Cold
Exhaust Valve Lash: .027" Cold
Lash Adjustment Method: Adjusting Screw
Cyl Head Torque: 100, 220, 220 Ft/Lbs, + 90°

Details

Shipping Information

  • Item Requires Shipping
  • 95.0 lbs.
  • W10.5000” x H10.0000” x L15.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.