No Image Available

1382010 | Caterpillar C10/C12 Camshaft, Remanufactured

Pricing: $730.33

Customize Your Item

Refundable Core Charge: $250.00
Free Shipping!


Let your Engine Breathe again

Your old engine not have the ’umph’ it once had? If not there is a good chance it's time to replace that worn out camshaft. From new aftermarket replacements to quality remanufactured camshafts Highway and Heavy Parts has you covered.

These cams aren't some no name knock off that come from some dirty factory where their acceptable tolerances are between ’close enough’ and ’ehh, no one will notice’. We only sell top of the line aftermarket products and premium remanufactured camshafts so you can rest assured the parts you buy are going to last while not paying an arm and a leg because the box is stamped with the OEM’s name.

Need a little extra proof? Let's talk Camshafts.

  • Get OEM quality without the price tag. Our remanufactured camshaft can greatly increase power and performance that was lost due to worn or damaged lobes.

  • During the process of regrinding the camshaft, case hardening depths are carefully reflected upon when large amounts of material are removed.

  • Each camshaft is thoroughly inspected to insure proper fit and finish.

  • Horsepower can be reduced up to 20% with a worn camshaft when compared to the efficiency of a remanufactured or new camshaft. Additionally valve timing can be affected as much as 3 degrees when there is as little as .001 wear to a camshaft.

  • (1) Camshaft

  • 1-Year Warranty, First 6-Months Includes Labor

OEM Applications:

  • 131-6667
  • 0R-9429
  • 0R9429
  • 136-4399
  • 0R8776
  • 1382011
  • 1382010
  • 1364339
  • 1316667

Technical Data

C10 Engine Specifications:
Year: 1996-2002
Liter: 10.3
CID: 629
Cylinder: L 6
Bore/Stroke: 4.9212",5.5118"
Compression Ratio:-
Firing Order: 1-5-3-6-2-4

Tune-Up Specifications:
Intake Valve Lash: .015" Cold
Exhaust Valve Lash: .025" Cold

Camshaft Specifications:
Camshaft Journal Diameter:2.9460-2.9480"
Cam End Play:.004-.020"
Camshaft Gear Bolt Torque: IDLER GEAR 145-205#, THRUST PIN 15-25#
Lobe Lift: Intake-.4480"Exhaust- .3760"

C12 Engine Specifications:
Liter: 12.0
CID: 730
Cylinder: L 6
Compression Ratio: -
Firing Order: 1-5-3-6-2-4

Tune-Up Specifications:
Oil Pressure At Idle: 10 PSI @ 600-800 RPM
Oil Pressure: 40-60 PSI @ 1400-1800 RPM
Intake Valve Lash: .015" Cold
Exhaust Valve Lash: .025" Cold

Camshaft Specifications:
Camshaft Journal Diameter: 2.9460-2.9480"
Cam End Play:.004-.020"
Lifter Diameter:.7870-.7878"
Camshaft Gear Bolt Torque: GEAR 145-205 FT/LBS, THRUST PIN 15-25 FT/LBS
Lobe Lift: Intake-.4480" Exhaust-.3760"


  • P200458R
  • P200458R
  • HHP
  • New

Shipping Information

  • Item Requires Shipping
  • 69.0 lbs.
  • W6.0000” x H6.0000” x L48.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.