Description
Overview:
New Interstate-McBee A-MCIFS60-4S inframe re-ring kit for Detroit Diesel Series 60 DDEC IV engines with articulated steel pistons and a 2.5 mm fire ring. The kit includes new liners, rings and articulated steel piston skirts; piston crowns are reused. All parts are new, and there is no core charge.
Kit Contents:
- (6) 2.5 mm piston ring sets
- (6) Top piston rings
- (6) 2nd piston rings
- (6) Oil control piston rings
- (6) Cylinder liners
- (6) Cylinder liner seal kits
- (6) Piston skirts
- (6) Piston pin kits
- (6) Piston pins
- (12) Piston pin retainers
- (6) Main bearing shell sets, 8929081
- (1) Thrust bearing shell set
- (2) Thrust washers
- (6) Connecting rod bearing shell sets
- (1) Cylinder head gasket
- (1) Cylinder head gasket set
- (1) Oil pan gasket
- (1) Oil pump inlet gasket
- (1) Oil pump inlet seal ring
- (1) Oil pump outlet seal ring
- (1) Oil inlet tube gasket
- (1) Turbo exhaust inlet gasket
- (1) Turbo oil return gasket
- (3) Air intake gaskets
- (3) Exhaust manifold gaskets
- (1) Tach drive cover gasket
- (12) Upper O-ring seals
- (6) Upper O-ring seals
- (6) Lower auxiliary injector seal gaskets
- (6) Injector tube O-ring seals
- (2) Block to gear case seals
- (2) Thermostat seals
- (1) Camshaft thrust plate seal
- (1) Cam thrust plate seal ring
- (1) Camshaft seal
- (1) Seal
- (2) Seals
Specifications:
- Part number: Interstate-McBee A-MCIFS60-4S
- Brand: Interstate-McBee
- Condition: New Aftermarket
- Component type: Inframe re-ring kit
- Piston type: Articulated steel (skirts included, crowns not included)
- Fire ring: 2.5 mm
- Engine: Detroit Diesel Series 60, DDEC IV
- Core: No core charge
Compatibility / Fitment:
Fits Detroit Diesel Series 60 DDEC IV engines with articulated steel pistons and a 2.5 mm fire ring.
Two hard fitment gates apply:
2.5 mm fire ring, articulated steel piston. Series 60 engines were built with different piston and fire ring combinations. This kit is for the 2.5 mm fire ring with articulated steel pistons. Check your engine serial number or the piston crown before ordering.
Re-ring kit, crowns not included. This kit replaces liners, rings and piston skirts but not the piston crowns.
Key Features:
- Equal or better quality compared to the OE
- Made to Original Equipment Manufacturer specifications
- Manufactured and assembled in an ISO 9001:2008 certified facility
- 2.5 mm fire ring with articulated steel piston skirts
- All new parts, no core charge
The Interstate-McBee A-MCIFS60-4S is a new inframe re-ring kit for Detroit Diesel Series 60 DDEC IV engines with a 2.5 mm fire ring and articulated steel pistons. Confirm your engine serial number before ordering.








