Description
Overview:
New engine overhaul kit OK5160F/6-75/75 for the six-cylinder Cummins QSB 6.7 (CM850) 24-valve engine with a 107 mm bore and fractured-cap connecting rods. The kit has 0.75 mm undersize rod and main bearings, for crankshafts ground 0.75 mm undersize. Check your rod type and measure the crankshaft journals before ordering.
Kit Contents:
All components are new aftermarket parts. OE part numbers are listed for reference.
- Main bearing set, 0.75 mm undersize (1), ref. Cummins 3802073
- Connecting rod bearings, 0.75 mm undersize (6), ref. Cummins 3901173
- Connecting rod bearings, lower (6), ref. Cummins 4893693
- Piston kits, QSB 4.5 / 6.7, standard (6), ref. Cummins 4955160
- Connecting rod bushings (6), ref. Cummins 4891178
- Camshaft bushings (2), ref. Cummins 3940059
- Upper (top) gasket set, QSB 6.7 (1), ref. Cummins 4955229
- Lower (bottom) gasket set, QSB 6.7 (1), ref. Cummins 4955230
- Rear crankshaft seal (1), ref. Cummins 4955372
Specifications:
- Part number: OK5160F/6-75/75 (also listed as COK5160F/6-75/75)
- Condition: New Aftermarket
- Component type: Engine overhaul kit
- Main bearings: 0.75 mm undersize
- Connecting rod bearings: 0.75 mm undersize
- Connecting rod type: Fractured cap
- Bore: 107 mm (4.21 in)
- Cylinders: 6, 24-valve
- CPL: 426, 427, 656, 1584, 1610, 1629, 2605, 8466, 8510, 8610, 8611, 8615, 8733, 40426, 40427, 40656, 41452, 41584, 41586, 41610, 41629, 42605, 42827, 43068, 43293, 43460, 43858, 43859, 43861, 43862
- Engines: Cummins QSB 6.7 (CM850)
Compatibility / Fitment:
Fits Cummins QSB 6.7 (CM850) 24-valve engines with a 107 mm bore and fractured-cap connecting rods, listed for CPL 426, 427, 656, 1584, 1610, 1629, 2605, 8466, 8510, 8610, 8611, 8615, 8733, 40426, 40427, 40656, 41452, 41584, 41586, 41610, 41629, 42605, 42827, 43068, 43293, 43460, 43858, 43859, 43861, 43862, where the crankshaft has been ground 0.75 mm undersize.
Two hard fitment gates apply:
Bearing size. This kit has 0.75 mm undersize rod and main bearings, for crankshafts ground 0.75 mm undersize on both the rod and main journals. A standard or other undersize crankshaft takes a different kit. Measure the journals before ordering.
Connecting rod type. This kit is for QSB 6.7 engines with fractured-cap connecting rods. Engines with machined-cap rods take a different kit. Inspect the rod caps before ordering.
The OK5160F/6-75/75 is a new overhaul kit for the Cummins QSB 6.7 with fractured-cap rods and 0.75 mm undersize rod and main bearings. Confirm your rod type and crankshaft size before ordering.







