Posted on

Why Summer Heat Is Harder on Diesel Engines Than You Think

Most people think winter is the hardest season on a diesel engine.

Cold starts, thick oil, weak batteries, gelled fuel, and freezing temperatures all create obvious problems.

But summer can be just as hard on a heavy-duty diesel engine—sometimes harder—because the warning signs are often less obvious.

A truck may run perfectly in spring, then start feeling sluggish once temperatures rise, the trailer is hooked up, the A/C is running, and the engine is working under load. The temperature gauge may still look normal, but the cooling system, oil, fuel system, turbocharger, and aftertreatment system may all be operating closer to their limits.

Summer heat does not always break a diesel engine immediately.

It tests every system that was already weak.

HHP Quick Takeaway

Summer heat increases stress on the cooling system, engine oil, fuel system, turbocharger, airflow system, and aftertreatment components. The best way to protect your diesel engine is to address small maintenance issues before high temperatures, heavy loads, and long idle periods expose them.

Continue reading Why Summer Heat Is Harder on Diesel Engines Than You Think
Posted on

Diesel Engine Overheating: How to Diagnose the Problem

Diesel engine overheating is one of the most common – and most damaging – issues you can face.

What starts as a slight temperature increase can quickly turn into major engine damage if not diagnosed correctly.

If your diesel engine is overheating, identifying the root cause early is critical to preventing expensive repairs and downtime.

Continue reading Diesel Engine Overheating: How to Diagnose the Problem
Posted on

Why Intake Valve Seats Fall Out In Diesel Cylinder Heads After Overheating

A dropped valve seat in a diesel engine isn’t just a cylinder head issue – it’s a direct result of thermal stress, material expansion, and loss of interference fit.

This type of failure is most commonly seen after an overheating event, and once it happens, the damage is usually severe enough to require cylinder head replacement and, in many cases, piston repair.

Understanding why valve seats fail – and what leads up to it – is critical to preventing repeat engine damage.

Continue reading Why Intake Valve Seats Fall Out In Diesel Cylinder Heads After Overheating